spaceIsn't she cute?!! (minus the black thread I used for the tutorial)
space
All bottle sizes are different, so adjust to your bottle.space
First, trace the bottom of the bottle onto fabric.
Trim with 1/4" seam allowance.
Measure how high you want the fabric to be on the neck of the bottle. I wanted mine to be about 7 1/2". Add 1/4" for the bottom seam allowance and 1" for the top. I also had a picture of the measurement around the bottle, but it's not here. I didn't want to add it, because I'm sure you all have had that experience when you add a picture later, it messes everything else up.
space
Well, any way... the measurements of my bottle were 7 1/2" high x 10 1/2" around. Add 1 1/4" to the height and 1/2" to the circumference.
My piece of fabric measured 8 3/4" x 11".
You will also need a piece of narrow ribbon about 20"-22" long with a safety pin to thread it through.
Take the rectangle piece of fabric with the long sides on the bottom. Fold over the short side, left to right. Mark down 1 1/4" from the top.
Sew with a 1/4" seam allowance from the mark down to the bottom.
At the top where it isn't sewn, fold over the 1/4" seam allowance.
Then fold over 1/4" on the top. I just pinned it so you can see without my finger being in the way.
Fold over again until it meets the original side seam. This will be the pocket where the ribbon will go through.
Sew close to edge. I used black thread so you can see the stitching.
Now for the bottom. Take the circle...
fold in half and iron.
The fold in half again and iron.
These creases will just help you center the circle inside the bottom tube.
Take the body of the fabric and make a crease across from the seam.
Open it up and match the seam to that crease you just ironed and iron the other two creases. Yikes...does that make sense. You'll get it when you're actually doing it.
Set both sides with the iron.
If you open it up, you will see the creases that will match the four creases in the circle.
Match and pin.
Pin in between to secure all around.
Sew with a 1/4" seam allowance. I used my needle down feature and you may need to lift the presser foot as you are making your way around the circle.
Turn bag right side out and thread ribbon through pocket at the top.
and there you have it...a hardware store bottle made over into a cute little addition to your sewing room. (I really need to redo that black thread)
I usually do my TTT post late on Monday and they post a little after midnight on Tuesday, but I'm on vacation this week from work and we were gone all day yesterday with the kids. We are having a big party here on the 4th of July, so lots of project to finish up around the house. My theory is...if you want to finish up projects, have a party, because it forces you to get them done.
My piece of fabric measured 8 3/4" x 11".
You will also need a piece of narrow ribbon about 20"-22" long with a safety pin to thread it through.
Take the rectangle piece of fabric with the long sides on the bottom. Fold over the short side, left to right. Mark down 1 1/4" from the top.
Sew with a 1/4" seam allowance from the mark down to the bottom.
At the top where it isn't sewn, fold over the 1/4" seam allowance.
Then fold over 1/4" on the top. I just pinned it so you can see without my finger being in the way.
Fold over again until it meets the original side seam. This will be the pocket where the ribbon will go through.
Sew close to edge. I used black thread so you can see the stitching.
Now for the bottom. Take the circle...
fold in half and iron.
The fold in half again and iron.
These creases will just help you center the circle inside the bottom tube.
Take the body of the fabric and make a crease across from the seam.
Open it up and match the seam to that crease you just ironed and iron the other two creases. Yikes...does that make sense. You'll get it when you're actually doing it.
Set both sides with the iron.
If you open it up, you will see the creases that will match the four creases in the circle.
Match and pin.
Pin in between to secure all around.
Sew with a 1/4" seam allowance. I used my needle down feature and you may need to lift the presser foot as you are making your way around the circle.
Turn bag right side out and thread ribbon through pocket at the top.
and there you have it...a hardware store bottle made over into a cute little addition to your sewing room. (I really need to redo that black thread)
I usually do my TTT post late on Monday and they post a little after midnight on Tuesday, but I'm on vacation this week from work and we were gone all day yesterday with the kids. We are having a big party here on the 4th of July, so lots of project to finish up around the house. My theory is...if you want to finish up projects, have a party, because it forces you to get them done.
space
Have a great Tuesday. We finally have some sun here. I think it may be one of only a few days we've had in all of June.
space
~Karen~
0 comments:
Post a Comment